Epson 1600 - Manual (Page 157)

7
Maintenance and Troubleshooting 7-11
R4C0910
Rev. C
A5 size TRBLE.FM
1/12/00 Pass 3
R Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
Quality problems
The entire image is distorted or blurred.
Cause What to do
Document is not placed
correctly. Make sure the document is flat against
the document table.
Document was moved. Make sure you do not accidentally
move the document during scanning.
Scanner orientation is
unsuitable. Make sure the scanner is on a flat,
stable surface.
Part of the image is distorted or blurred.
Cause What to do
The document condition is
poor or the document was
placed incorrectly. Make sure the document is uniformly
flat against the document table. A
document that is wrinkled or warped
may not scan well.
c
Caution:
Do not place heavy objects on the
document table.
Edges of the document are not scanned.
Cause What to do
The document size exceeds
the readable scanning area. Position the document so the area you
want to scan is within the edge guide
limits of the document table.
Note that an area 1.6mm from the
horizontal guide and 1mm from the
vertical guide will not be scanned.