Epson 1600 - Manual (Page 29)

2
Setting Up the Scanner 2-5
R4C0910
Rev. C
A5 size SETUP.FM
1/12/00 Pass 3
R Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
Releasing the Transportation Lock
Before connecting the scanner to a power source, you must release
the transportation lock.
1. Place the scanner on a flat, stable surface with the back facing
you.
2. Slide the transportation lock lever on the back of the scanner
to the UNLOCK position, as shown below.
Note:
Simply sliding the transportation lock to the LOCK position does not
fully lock the carriage. Before moving or transporting the scanner, be
sure to perform the procedure under “Transporting the Scanner and the
Transparency Unit” on page 7-4.