HP 2600n - Manual (Page 28)

Problem Cause Solution
The device might be malfunctioning. To check the device, print a
Configuration page.
Pages print very slowly. Heavier media types can slow the print
job. Print on a different type of media.
Complex pages will print slower. Proper fusing may require a slower
print speed to ensure the best print
quality.
Pages did not print. The device might not be pulling media
correctly. See Paper handling issues .
The media is jamming in the device. Clear the jam.
The USB cable might be defective or
incorrectly connected. Ŷ Disconnect the USB cable at both
ends and reconnect it.
Ŷ Try printing a job that has printed
in the past.
Ŷ Try using a different USB cable.
Other devices are running on your
computer. The device might not share a USB
port. If you have an external hard drive
or network switchbox that is connected
to the same port as the device, the
other device might be interfering. To
connect and use the device, you must
disconnect the other device or you
must use two USB ports on the
computer.
Table 6-9 Performance issues (continued)
www.partshere.com Partshere Troubleshooting www.partshere.com Partshere Troubleshooting