HP 2600n - Manual (Page 38)

Control panel message Description Recommended action
If a surge protector is being used, remove
it. Plug the device directly into the wall
socket. Use the power switch to turn the
device on.
Check the engine (DCC) firmware version.
Update if needed. Replace the DCC if a
firmware upgrade does not resolve the issue.
57 Fan Error
Turn off then on
The device has experienced a problem with
its internal fan. Turn off the power by using the power
switch, wait at least 30 seconds, and then
turn on the power and wait for the device to
initialize.
The fan is not replaceable. Replace the
engine.
Supplies messages
Control panel message Description Recommended action
10.000x Supply error E-label cannot be read or print cartridge is
not properly installed.
10.0000 = Black print cartridge
10.0001 = Cyan print cartridge
10.0002 = Magenta print cartridge
10.0003 = Yellow print cartridge
1 Reinstall print cartridge.
2 Power cycle device.
3 If the problem is not solved, replace the
cartridge.
10.100x Supply error
alternates with
Reinstall
The supplies gauge will display the
consumption levels of print cartridges.
A print cartridge is missing.
10.1000 = Black print cartridge
10.1001 = Cyan print cartridge
10.1002 = Magenta print cartridge
10.1003 = Yellow print cartridge
Install the correct print cartridge.
HP supplies
installed
The printer transitioned from having one or
more non-HP supplies to having all HP
supplies installed. No action required.
One of the following messages may display:
Incorrect black
Incorrect cyan
Incorrect magenta
Incorrect yellow
The <color> print cartridge not installed
correctly. Reinstall the <color> print cartridge.
One of the following messages may display:
Install black cartridge
Install cyan cartridge
The out threshold has been reached. The supply must be replaced before
printing can continue.
www.partshere.com Partshere Troubleshooting www.partshere.com Partshere Troubleshooting