HP 2600n - Manual (Page 44)

Problem Cause Solution
The paper path might need cleaning. Clean the device.
Marks repeatedly appear at even
intervals on the printed side of the page. The device is not set to print on the
type of media on which you want to
print. In the printer driver, select the Paper
tab and set Type is to match the type
of paper on which you are printing.
Print speed might be slower if you are
using heavy paper.
For more information, see Repetitive
image defect ruler .
Internal parts might have toner on them. The problem typically corrects itself
after a few more pages.
The paper path might need cleaning. Clean the device.
The fuser might be damaged or dirty. Clean using instructions in HP Toolbox.
A print cartridge may have a problem. To determine which cartridge has a
problem, print the PQ diagnostics page
from HP Toolbox.
Marks repeatedly appear at even
intervals on the unprinted side of the
page.
Aa
a
Internal parts might have toner on them. The problem typically corrects itself
after a few more pages.
The paper path might need cleaning. Clean the device.
The fuser might be damaged or dirty. Clean using instructions in HP Toolbox.
For more information, see Repetitive
image defect ruler .
The printed page contains misformed
characters. The media might not meet HP
specifications. Use a different paper, such as high-
quality paper that is intended for color
laser printers.
If characters are incorrectly formed so
that they produce a wavy effect, the
laser scanner might need service. Verify that the problem also occurs on
the Configuration page.
Table 6-13 General print quality issues (continued)
www.partshere.com Partshere Troubleshooting www.partshere.com Partshere Troubleshooting