HP 2600n - Manual (Page 34)

2 Memory. This section lists memory-related information, such as the total memory that is installed.
3 Paper settings. This section lists information about the media type for each tray and about the type settings for
all the media that the printer supports.
4 Page counts. This section lists the total number of pages printed, the number of color pages printed, and
information about paper jams.
5 DC controller version. This section lists the DC controller version.
6 USB settings. This section contains information for the USB setting options.
Ŷ U=0 Hi speed
Ŷ U=4 Full speed
Ŷ U=5 Full speed auto switched from hi speed
7 Extended print modes enabled. The following list contains the options for enabling extended print modes.
Ŷ DM=0 Default setting
Ŷ DM=1 Extended print mode enabled
8 Status log. This section contains information about printer errors, including an error log code and the page count
at which the error occurred. For a list of status log messages, see
Table 6-5 Status log messages .
9 Paper types. This section contains information about paper types that can be configured by the user. The default
settings are Plain.
10 Network settings. This section contains the following network information about the printer.
Ŷ Host name
Ŷ Hardware address
Ŷ LInk settings
Ŷ IP address information
Ŷ IP subnet mask
Ŷ IP default gateway
Ŷ WINS configuration information
Ŷ DHCP server and lease time information
Ŷ Preferred WINS server information
Ŷ mDNS name
11 Product settings. This section lists the following information that is gathered during software installation:
Ŷ Language
Ŷ Company name
Ŷ Jam recovery settings (if set to ON, the last page will reprint if there is a paper jam)
Ŷ I/O timeout information (default is 120 seconds)
www.partshere.com Partshere Troubleshooting www.partshere.com Partshere Troubleshooting