Seats – HONDA 2010 Fit User Manual

Page 101

Advertising
background image

Adjusting the Head Restraint

The head restraints adjust for height.
You need both hands to adjust a
restraint. Do not attempt to adjust it
while driving. To raise it, pull
upward. To lower the restraint, push
the release button sideways, and
push the restraint down.

When a passenger is seated in the
rear center seating position, the
center head restraint should be
adjusted up or down, to match the
passenger's height.

Removing the Head Restraint

To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button,
then pull the restraint out of the seat-
back.

Failure to reinstall the head
restraints can result in severe
injury during a crash.

Always replace the head
restraints before driving.

When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.

Make sure the head restraint locks in
position when you reinstall it.

Front

RELEASE BUTTON

CUSHION

LEGS

SEAT-BACK

Rear Center
Position

RELEASE BUTTON

CUSHION

LEGS

SEAT-BACK

CONTINUED

Seats

95

Instruments

and

Controls

Advertising
This manual is related to the following products: