HONDA 2010 Fit - Manual (Page 91)

To program the Drive Lock mode:
Locks all doors and tailgate when the
vehicle's speed reaches about 9 mph (15
km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. On A/T vehicles, push and hold the
brake pedal, and move the shift
lever out of the Park (P) position.
4. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 5
seconds, turn the ignition switch to
the ACCESSORY (I) position.
On
A/T vehicles, move the shift lever to
the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Auto Door Unlocking
The auto door unlocking feature has
five possible settings:
● The auto door unlocking is
deactivated all the time.
● On A/T vehicles, the driver's door
unlocks when you move the shift
lever to the Park (P) position with
the brake pedal depressed.
This is the default setting.
● All doors and tailgate unlock when
you move the shift lever to the Park
(P) position (A/T vehicles) with the
brake pedal depressed.
● The driver's door unlocks whenever
you turn the ignition switch to the
ACCESSORY (I) position.
This is the default setting on M/T
vehicles.
● All doors and tailgate unlock
whenever you turn the ignition
switch to the ACCESSORY (I)
position.
A/T models
CONTINUED
Door Locks
85
Instruments
and
Controls