HONDA 2010 Fit - Manual (Page 278)

3. Slide the blade out of the holder. 4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in the
slots along the edge of the new
blade.
5. Slide the new blade into the
holder. Make sure it is engaged in
the slot along its full length.
Insert both ends of the blade into
the holder. Make sure they are
secure.
6. Install the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm against the
windshield.
BLADE
REINFORCEMENT
Wiper Blades
272