HONDA 2010 Fit - Manual (Page 92)

To turn off the Auto Door Unlock
modes:
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and open the driver's
door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click,
and after about 5 seconds, you will
hear another click.
4. Release the switch, and within 5
seconds, turn the ignition switch to
the LOCK (0) position.
To program the Park Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the shift lever is
moved into the Park (P) position with
the brake pedal depressed (A/T vehicles
only).
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
●
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature .
● Or, until you hear two more
clicks (after about 10 seconds)
to activate
all doors and tailgate
unlock feature .
4. Release the switch, and within 5
seconds, turn the ignition switch to
the LOCK (0) position.
Door Locks
86