HONDA 2010 Fit - Manual (Page 270)

5. Turn on the lights to make sure
the new bulb is working.
Replacing a Front Turn Signal
Light Bulb
1. Open the hood.
2. Remove the socket by turning it
one-quarter turn counterclockwise.
3. Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it unlocks.
4. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Turn on the lights to make sure
the new bulb is working.
Lights
264