HP AA-RTDRB-TE - Manual (Page 41)

Configuring the Product
41 Embedded Web Server User Guide
Note: Spaces are allowed in the Community Name field.
c. Click the check box in the Write Authorization column to enable or
disable write authorization for the trap recipient (default is disabled). A
check mark indicates write authorization is enabled. When the feature is
enabled, a management workstation user can change sysContact,
sysName, and sysLocation SNMP variables.
d. Type the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the Trap Recipient field in four-byte,
dotted-decimal format. It is recommended the IP address be used.
e. The default UDP port number for trap recipients is 162. Type a decimal
port number in the UDP Port Number field to override the default value.
3. Click Activate to save and activate the changes. The following message
displays: Your changes to the SNMP configuration have
been successfully activated
.