Hobart Welding Products STELLAR AT OM-2208 - Manual (Page 15)

OM-2208 Page 11
SECTION 3 – INSTALLATION
3-1. Selecting a Location
loc_2 3/96 - Ref. ST-151 556 / ST-801 192
1 Lifting Handles
Use handles to lift unit.
2 Hand Cart
Use cart or similar device to move
unit.
3 Rating Label
Use rating label to determine input
power needs.
4 Line Disconnect Device
Locate unit near correct input
power supply.
Y Special installation may be
required where gasoline or
volatile liquids are present –
see NEC Article 511 or CEC
Section 20.
24 in
(610 mm)
17 in
(432 mm)
12-1/2 in
(318 mm)
Movement
1
1
2
Y Do not move or operate unit
where it could tip.
Location
4
3
Dimensions And Weight
18 in
(460 mm)
18 in
(460 mm)
76 lb (34.6 kg)