Hawking Technology H2BR4 - Manual (Page 11)

vi R
Note server is the only DHCP server available on your LAN. Once
y v , please proceed to Step 3.
2b) Windows 2000
i: Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
ii: Double-click the Network and Dial-up Connections icon. In the Network and Dial-up Connection window,
double-click the Local Area Connection icon. The Local Area Connection window will appear.
iii: In the Local Area Connection window, click the Properties button.
iv: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list. Select it
and click the Properties button.
v: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically and Obtain
DNS server address automatically as shown on the following screen.
11
Figure 0.3
ii: eboot the PC. Your PC will now obtain an IP address automatically from your router’s DHCP server.
: Please make sure that the router’s DHCP
ou’ e configured your PC to obtain an IP address automatically