Hawking Technology H2BR4 - Manual (Page 25)

User ID
Enter the User Name provided by your ISP for the PPTP connection (sometimes called a
Connection ID).
r the Password provided by your ISP for the PPTP connection.
PTP Gateway If your LAN has a PPTP gateway, then enter that PPTP gateway IP address here. If you
do not have a PPTP gateway then enter the ISP’s Gateway IP address above.
onnection ID This is the ID given by ISP. This is optional.
TU This is optional. You can specify the maximum size of your transmission packet to the
Internet. Leave it as it is if you do not wish to set a maximum packet size.
EZEQ-ISRAEL Select this item if you are using the service provided by BEZEQ in Israel.
onnection Type If you select “Continuous”, the router will always be connected to the ISP/Internet. If the
WAN line breaks down and links again, the router will auto-reconnect to the ISP. If you
select “Connect On Demand”, the router will auto-connect to the ISP when someone
wants to use the Internet and keep connected until the WAN idle timeout. The router will
close the WAN connection if the time period during which no one has been using the
Internet exceeds the “Idle Time”. If you select “Manual”, the router will connect to the
ISP only when you click “Connect” manually from the Web user interface. The WAN
connection will not get disconnected due to the idle timeout. If the WAN line breaks
down and later links again, the router will not auto-connect to the ISP.
le Time You can specify an idle time threshold (in minutes) for the WAN port. This means if no
packets have been sent (no one is using the Internet) during this specified period, the
router will automatically disconnect the connection to the ISP/Internet.
Note: The WAN "idle to-disconnect function may not work due to abnormal
activities of some network application software, computer viruses or hacker attacks from
the Internet. For example, some software sends network packets to the Internet in the
en you are not using the Internet. This function also may not work
ase make sure this function can work properly when you use this
work. In order to prevent an extra fee from being charged by your
Password
Ente
P
C
M
B
C
Id
timeout" au
background, even wh
with some ISPs. Ple
function the first time, especially if your ISP charges you by time used. Due to various
uncontrollable issues, we cannot guarantee the WAN "idle timeout" auto-disconnect
function will always
ISP, please turn off the router when you are finished using the Internet.
lick OK w y e d the configuration above. You have now completed the configuration for the PPTP C hen ou hav finishe
pported by this router,
ee Chapters 2, 3, 4.
connection. You can start using the router now. If you wish to use some of the advanced features su
s
25