Hawking Technology H2BR4 - Manual (Page 21)

Parameters
Description
Host Name If your ISP requires a Host Name, type in the host name provided by your ISP; otherwise
e.
in order for you to connect to the
Internet. This MAC address is the PC’s MAC address that your ISP had originally
on or use
AC Address” button to replace the WAN MAC address with the MAC
address of that PC (you have to be using that PC for the Clone MAC Address button to
explanation on MAC addresses.)
leave it blank if your ISP does not require a Host Nam
MAC Address
Your ISP may require a particular MAC address
connected your Internet connection to. Type in this MAC address in this secti
the “Clone M
work). To find out the PC’s MAC address see Appendix A. (See Glossary for an
Click OK when you have finished the configuration above. You have now completed the configuration for the Cable
odem connection. You can start using the router now. If you wish to use some of the advanced features supported by
ters 2, 3, 4.
Figure 1.4
M
this router, see Chap
1.2 Fixed-IP xDSL
Select “Fixed-IP xDSL” if your ISP has given you a specific IP address for you to use. Your ISP should provide all the
information required in this section.
21