Husqvarna 80792 - Manual (Page 23)

23
INSTALLATION INSTRUCTIONS
Flail Trimmer Heads
If the machine is equipped with a
trimmer line head (T18/T230 models),
unscrew the head (turn clockwise to
remove) and remove all adapters.
Replace the spacer and install all
parts as shown above. Tighten the
arbor bolt securely.
If blades become worn or damaged,
they can be replaced by removing the
shoulder bolt with a standard flat-
blade screwdriver.
1 2
3 PARTS LIST
Model View T18, T230/C230
Item
Part No.
Spacer 22035-13230
Holder A 22035-13242
Holder B 99909-331
Bolt Guard 22035-13290
Arbor Bolt 22035-13271
T250/C250, T260/C260
Item
Part No.
Holder A 22420-13510
Holder B 99909-331
Bolt Guard 22024-13291
Arbor Bolt 22000-13512
T270/C270
Item
Part No.
Holder A 22024-13912
Holder B 99909-331
Bolt Guard 22014-13291
Arbor Bolt 22000-13512
Replacement Blades (3 required)
Part No.
99909-148
The three-blade flail head is recom-
mended for light- to medium-duty
applications. The flail head is great for
clearing weeds and heavy grass.
NOTE: The three-blade flail head will
fit straight shaft grass machines
ranging from the Shindaiwa T18
through T270/C270. When installing
the head onto a trimmer, notice that
Holder B is included with the flail head
package.
Arbor Bolt
Bolt Guard
Flail Head
Spacer
Trimmer
Gearcase
Insert the new blade and shoulder
bolt, and tighten securely.
3 Bolt
4 Flail Blade
99909-147
Item Part No.
1 99909-75
2 99909-82
3* 99909-149
4* 99909-148
*3 required
Flail Head
1 Nut (not shown)
2 Washer (not shown)
Holder A
Holder B