Husqvarna 80792 - Manual (Page 24)

24
Model View
1 2
INSTALLATION INSTRUCTIONS
Super Flail Trimmer Heads
The three-blade super flail head is a
perfect attachment for trimming grass,
vegetation, and light brush. The nylon
blades are supported by a metal
bearing surface for superior perfor-
mance and durability.
NOTE: The three-blade super flail
head will fit straight shaft grass
machines ranging from the Shindaiwa
T18 through B530. When installing the
head onto a trimmer, notice that
Holder B is included with the flail head
package (except C350 and T350 units
that use a different Holder B).
T18, T230/C230
Item
Part No.
Spacer 22035-13230
Holder A 22035-13242
Holder B 99909-331
Bolt Guard 22035-13290
Arbor Bolt 22035-13271
T250/C250–T260/C260
Item
Part No.
Holder A 22020-13510
Holder B 99909-331
Bolt Guard 22024-13291
Arbor Bolt 22000-13512
T270/C270
Item
Part No.
Holder A 22024-13912
Holder B 99909-331
Bolt Guard 22024-13291
Arbor Bolt 22000-13512
T350
Item
Part No.
Holder A 22000-13241
Holder B 99909-331
Bolt Guard 22000-13290
Arbor Bolt 22000-13212
C350, B450
Item
Part No.
Holder A 22015-13241
Holder B 109010
Bolt Guard 22015-13270
Arbor Bolt 22015-13261
If the machine is equipped with a
trimmer line head (T18/T230 models),
unscrew the head (turn clockwise to
remove) and remove all adapters.
Replace the spacer and install all
parts as shown above. Tighten the
arbor bolt securely.
Arbor Bolt
Bolt Guard
Super
Flail Head
Spacer
Trimmer
Gearcase
PARTS LIST
If blades become worn or damaged,
they can be replaced by removing the
locking bolt with a 4 mm allen wrench.
3
Push the bearing out and install it into
the new blade, insert the blade and
locking bolt, then tighten securely.
WARNING! NEVER USE A METAL
CUTTING BLADE ON A SUPER
FLAIL TRIMMER HEAD!
99909-1566
Item Part No.
1 101017
2* 103012
3 101018
Super Flail Head
1 Upper Body
2 Nut
3 Lower
Body
4 Bolt
5 Flail Blade
6 Bushing
Item Part No.
4* 103011
5* 101058
6* 105014
Holder A
Holder B
*3 required
NOTE:
Replacement flail blades may be purchaced in a pack of 3 (p/n 101058-03 or
a pack of 12 (p/n 101058-12).