Hotpoint EG1000GX - Manual (Page 5)

5
GB
Oven Timer Operation
TIMER FUNCTION BUTTONS
Minute Minder Button
Here you can set a time period of up to 23 hours 59
minutes, that will count down. When it reaches zero,
the timer will emit an audible tone.
For Example: If you set 20 minutes, the audible
tone will occur 20 minutes later.
AUTO COOKING PROGRAMME
Cook Period Button
Cook Period is the actual length of time for which,
the timer will switch the oven(s) on as part of an
"Auto Cooking" programme.
(e.g. If you set 2 hours, the food will be cooked for 2
hours).
End Time Button
The time of day at which you want an "Auto Cooking"
programme to end.
For Example: If you set a "Cook Period" for 2 hours,
and "End Time" of 11:00. The timer will switch the
oven(s) on at 9:00 and turn the oven(s) off at 11:00.
You will hear a audible tone at 11:00, to indicate that
the Auto Cooking Programme has finished.
Notes:
- When setting an Auto Cooking programme you will
need to set the oven control(s) to the required
temperature(s) when you set the timer.
- If an Auto Cooking programme has been set the
oven(s) will only operate during the pre-
programmed time.
Manual Button
Needs to be pressed to cancel an Auto Cooking
programme and return the oven(s) to Manual operation.
"+" and "-" Buttons
Used to adjust the various timer function settings.
SETTING THE TIME OF DAY
Step 1 Make sure all oven
controls are turned Off.
Step 2 Check the electricity
supply to the cooker is turned
on.
Step 3 When switched on the
display will show 0.00 and the
Auto symbol, flashing
intermittently.
A
U
T
O 0 0 0
..
Step 4 Press & hold in both the
Cook Period & End Time buttons
together.
Step 5 With the Cook Period &
End Time buttons still held in,
press either the "+" or "-" buttons
to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6
above.
Note: You cannot adjust the time of day if the
timer has been set for an Auto Cooking
Programme.
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day
is set correctly.
Step 2 Press and hold the
Minute Minder button.
Step 3 With the Minute Minder
button held in, set the required
Minute Minder period using the
"+" and "-" buttons. A 'bell'
symbol will light up.
Release all buttons and the timer display will revert
back to the time of day.
The 'bell' symbol will remain lit to signify that a
Minute Minder period has been set.
At the end of the set time an audible tone will be
heard, and the 'bell' symbol will disappear.
Step 4 To cancel the audible
tone press the Minute Minder
button.
Note 1 When the Minute Minder has been set,
the time remaining can be checked at
any time by simply pressing the Minute
Minder button.
Note 2 If necessary the Minute Minder can be
cancelled before the tone sounds by
pressing and holding the Minute Minder
button and then at the same time
pressing the "-" button until 0.00 appears
in the display window.
A
U
T
O 0 0 0
.
0 0 0
.
0 0 0
.
A
U
T
O