Hotpoint EG1000GX User Manual

Page 7

Advertising
background image

7

GB

Step 5

Release all buttons.

The timer display will revert to

the time of day with the 'Auto'

symbol lit & 'cookpot' symbol

remaining lit.

At the end of the Cook Period the

'Auto' symbol will flash and an

intermittent audible tone will be

heard.

The audible tone will continue until

cancelled. The 'Auto' symbol will

continue to flash until the timer is

returned to Manual operation (see

below).

Step 6 Press the Manual

button. The audible tone will be

cancelled and the oven(s) will be

returned to Manual.

Step 7

Turn the oven control(s) to the OFF position.

TO CANCEL AN AUTO COOKING

PROGRAMME BEFORE THE COOK

PERIOD HAS FINISHED.

Step 1

Turn the oven control to the OFF position.

Step 2

Press the Manual

button to return the oven to

"Manual" operation. The 'Auto'

symbol will go out.

Note 1 When cooking automatically the Cook

Period can be checked at any time by simply

pressing the Cook Period button.

A
U
T
O

4

1 2 0

.

A
U
T
O

6

1 2 0

.

NOTE: The Cookpot symbol disappears

6

1 2 0

.

OTHER NOTES ON TIMER OPERATION

1. When cooking Automatically the Cook Period can

be checked at any time simply by pressing the

Cook Period button.

2. When cooking Automatically the End Time can be

checked at any time by simply pressing the End

Time button.

3. Having set a Cook Period and End Time an

electronic device stores the information. The device

within the timer will switch the oven(s) on and off at

the required times.

4. When setting an Auto Cooking Programme and a

mistake is made, to clear:-

(a) Press & release the Manual button.

(b) Start the sequence again.

5. If at any time the display shows three flashing zero's

0.00 and 'Auto', it is likely that the electricity supply

to the oven has been interrupted. Reset the timer

to the correct time of day. Food in the oven may,

therefore, not have been cooked, before serving

check food is thoroughly heated and completely

cooked.

6. To set each function always press and hold the

required function button and at the same time press

"+" or "-" buttons.

5

1 0 0

.

Advertising