Hitachi CP-X10000 - Manual (Page 32)

32
PICTURE menu
Item Description
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name
includes CUSTOM and then
pressing the ► button or the
ENTER button displays a
dialog to aid you in adjusting
the OFFSET and GAIN of the
selected mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER or VIDEO button.
Each time you press the ENTER or VIDEO button, the pattern
changes as below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 15 steps
• When this function is performed, lines or other
distortion may appear.
COLOR
Using the ◄/► buttons adjusts the strength of whole color.
Weak ó Strong
• This item can be selected not only for a video, s-video and
component signal but also HDMI and DVI-D signal when the VIDEO
is selected on the DIGITAL FORMAT item ( 37).
TINT
Using the ◄/► buttons adjusts the tint.
Reddish ó Greenish
• This item can be selected not only for a video, s-video and
component signal but also HDMI and DVI-D signal when the VIDEO
is selected on the DIGITAL FORMAT item ( 37).
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
Weak ó Strong
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
(continued on next page)
1 HIGH  1 CUSTOM  2 MID  2 CUSTOM
3 LOW
5 CUSTOM5 Hi-BRIGHT-24 CUSTOM4 Hi-BRIGHT-1
6 CUSTOM





6 Hi-BRIGHT-3

3 CUSTOM