Hitachi CP-X10000 - Manual (Page 43)

43
SCREEN menu
Item Description
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó OFF
Feature
MyScreen
Screen can be registered by the MyScreen item
( 44)
.
ORIGINAL Screen preset as the standard screen.
OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen ( 26) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu ( 62), the START UP is fixed to MyScreen.
(continued on next page)