Hitachi DZ-BD70A - Manual (Page 108)

108
V
ie
w
in
g o
n t
he
O
th
er
D
ev
ice
s
Connecting the camcorder to your TV’s component
input
Notes
• 1080i signals are output from the camcorder’s HDMI OUT terminal. When
the camcorder is connected to a TV which is not compliant with 1080i
signals, the message “Playback error has occurred. Change the connection
terminal.” appears in the camcorder’s LCD display. If the camcorder is
recording or playing when this message is displayed, the operation stops. In
this case, reconnect the cable through another method such as by using the
component terminal. (See also “Troubleshooting” (p.140).)
• If the camcorder is connected to the TV through the HDMI terminal, audio
will not be output from the camcorder other than during playback.
Audio Input
R
red
white
AV/S cable
Component cable (supplied)
The Video and S-Video
cables are not used.
yellow
* Do not connect anything to the camcorder’s HDMI OUT terminal.
L
green
blue
red
Component
Input