Hitachi DZ-BD70A - Manual (Page 126)

126
C
on
ne
cti
ng
to
y
ou
r P
C
Creating a disc with the
images recorded by the
camcorder
ImageMixer 3 HD Edition for
BDCAM allows you to use the
imported images and create a BD to
store Hi-Vision quality images, or
DVD-Video or DVD-VR which can
be viewed on a common DVD player/
recorder.
The following are procedures to create
a disc from the images stored to the
PC using ImageMixer 3 HD Edition
for BDCAM.
4
Create a name for your smart album.
The smart album created in steps 2
and 3 is added as an “Untitled”
smart album. Click on “Untitled” to
select it, then click on it again so
that you can change the name of the
smart album.
1
Launch ImageMixer 3 HD Edition for
BDCAM.
Click
2
Load a disc into the disc drive.
Insert a disc on which images are to
be written.
Note that the quality of images will
differ as indicated in the table
below according to the type of the
disc chosen.
Disc type
Image quality
type
List created
BD-RE/BD-R
Hi-Vision
image quality Blu-ray
creation list
DVD-RAM/
DVD-RW
Standard
image quality
(DVD-VR) DVD-VR
creation list
DVD-RW/
DVD-R
Standard
image quality
(DVD-Video)
DVD
creation list
Table 1: Disc type and its contents
3
Create a disc creation list
Click on “Library”, then click
“Disc List” at screen bottom right.
You can select from three types of
disc creation lists. Using Table 1 as
a reference, select a disc creation
list suited to the disc you inserted
into the disc drive in step 2.
Click Created list