Hitachi DZ-BD70A - Manual (Page 37)

37
B
at
te
ry
P
ac
k
„ Connecting the camcorder to a wall outlet
„ Detaching the DC power cord/battery pack from
the camcorder
To wall outlet
Connect to the AC adapter/charger.
Connect to the AC adapter/
charger.
Power cable
Connect to the
camcorder.
DC power cord
Notes
• The battery pack will not be charged while the DC power cord is connected
to the AC adapter/charger even if the battery pack is attached to the AC
adapter/charger.
• The AC adapter/charger can be used around the world. An AC plug adapter
is required in some foreign countries. If you need one, purchase it from
your local electronics distributor.
AC 200-240V
AC Plug Adapter (not supplied)
Always turn the power off before disconnecting
the power supply.
While pressing and holding BATT, slide the
DC connector or battery pack upward, then
remove it.
• Be careful not to drop the battery pack
while detaching it.