Hitachi DZ-BD70A - Manual (Page 155)

155
A
dd
itio
na
l In
fo
rm
at
io
n
Note when transferring or discarding discs and SD memory cards
• The “Format” function on this camcorder will only change the file control information.
It will not completely delete the data in the built-in hard disk and your personal data
could leak out. To prevent the data from leaking out, execute complete deletion of the
HDD following the procedures below.
1 While the camcorder is in HDD recording pause mode, press DISC NAVIGATION,
then press MENU.
2 Press (/' to select “HDD Setting”, then press %.
3 Press (/' to select “Full Format”, then press the confirmation button.
4 Press & to select “YES”, and then press the confirmation button to confirm the
setting and begin HDD full format.
• “Formatting” or “deletion” using the functions of the camcorder or a PC will change
only the file control information. It will not completely delete the data on disc or
memory card.
• When transferring or discarding a disc or memory card, it is recommended that you
physically destroy it or use deletion exclusive software (generally available) to
completely delete the data on it. It is user's responsibility to control the data on disc and
memory card.
• Hitachi will not accept any responsibility for leaking of personal data.