HP 5400ZL - Manual (Page 283)

Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
2. Configure the priorities for the DSCPs you want to use.
802.1p priorities
are configured
in this step.
Figure 6-26. Assign Priorities to the Selected DSCPs
3. Assign the DSCP policies to the selected VLAN IDs and display the result.
Figure 6-27. The Completed VID-DSCP Priority Configuration
The switch will now apply the DSCP policies in figure 6-27 to packets received
on the switch with the specified VLAN-IDs. This means the switch will:
■ Overwrite the original DSCPs in the selected packets with the new DSCPs
specified in the above policies.
■ Assign the 802.1p priorities in the above policies to the appropriate
packets.
6-61