To set up and install the switch in your network, Physical installation, Physical installation -8 – HP 5400ZL User Manual
Page 32
Getting Started
To Set Up and Install the Switch in Your Network
■
In the Main Menu of the Menu interface select
8. Run Setup
For more on using the Switch Setup screen, see the Installation and Getting
Started Guide
you received with the switch.
To Set Up and Install the Switch in Your
Network
Physical Installation
Use the Installation and Getting Started Guide for the following:
■
Notes, cautions, and warnings related to installing and using the switch
and its related modules
■
Instructions for physically installing the switch in your network
■
Quickly assigning an IP address and subnet mask, set a Manager pass
word, and (optionally) configure other basic features.
■
Interpreting LED behavior.
For the latest version of the Installation and Getting Started Guide for your
switch, refer to “Getting Documentation From the Web” on page 1-6.
1-8