HP 5400ZL - Manual (Page 215)

Switch Meshing
Operating Notes for Switch Meshing
traffic patterns, including the situation where multiple VLANs are configured
and a broadcast path through the mesh domain leads only to ports that are in
the same VLAN as the device originating the broadcast.
Unicast Packets with Unknown Destinations
A meshed switch receiving a unicast packet with an unknown destination does
not flood the packet onto the mesh. Instead, the switch sends a query on the
mesh to learn the location of the unicast destination. The meshed switches
then send 802.2 test packets through their non-meshed ports. After the unicast
destination is found and learned by the mesh, subsequent packets having the
same destination address will be forwarded. By increasing the
MAC Age Time
you can cause the switch address table to retain device addresses longer. (For
more on
MAC Age Time, refer to “System Information” in the chapter titled
“Interface Access and System Information” in the Management and Config­
uration Guide
for your switch.) Because the switches in a mesh exchange
address information, this will help to decrease the number of unicast packets
with unknown destinations, which improves latency within the switch mesh.
Also, in an IP environment, ProCurve recommends that you configure IP
addresses on meshed switches. This makes the discovery mechanism more
robust, which contributes to decreased latency.
Spanning Tree Operation with Switch Meshing
Using MSTP with several switches and no switch meshing configured can
result in unnecessarily blocking links and reducing available bandwidth. For
example:
5-17