Displaying resource usage for qos policies, Displaying resource usage for qos policies -32 – HP 5400ZL User Manual
Page 254
Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
Displaying Resource Usage for QoS Policies
When you configure global QoS classifiers using TCP/UDP and a Layer 4
Application port number or port range, the switch automatically assigns two
QoS resources for each policy—one for traffic to the TCP/UDP destination
port and one for traffic to the TCP/UDP source port.
The
show qos resources command displays the number of hardware resources
currently in use by QoS policies as well as other software features.
ProCurve# show qos resources
Resource usage in Policy Enforcement Engine
1 |
0 |
1 |
|
0 |
0 |
Incldues the hardware resources used
by currently applied QoS policies.
|
Rules
| Rules Used
Ports | Available | ACL | QoS
| IDM |
VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
1-24 |
3014 |
15 |
11 |
0 |
1 |
0 |
3 |
25-48 | 3005 |
15 |
10 |
10 |
0 |
3 |
A
|
3017 |
15 |
8 |
0 |
3 |
|
Meters
| Meters Used
Ports | Available | ACL | QoS | IDM
VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
1-24 |
250 | |
5 |
|
|
0 |
25-48 | 251 | |
4 |
|
|
0 |
A
|
253 | |
2 |
0 | |
|
0 |
| Application |
| Port Ranges | Application Port Ranges Used
Ports | Available | ACL | QoS | IDM |
VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
1-24 |
3014 |
2 |
0 |
0 | |
0 |
0 |
25-48 | 3005 |
2 |
0 |
0 | |
0 |
0 |
A
|
3017 |
2 |
0 |
0 | |
0 |
0 |
0 of 8 Policy Engine management resources used.
Key:
ACL = Access Control Lists
QoS = Device & Application Port Priority, QoS Policies, ICMP rate limits
IDM = Identity Driven Management
VT = Virus Throttling blocks
Mirror = Mirror Policies, Remote Intelligent Mirror endpoints
Other = Management VLAN, DHCP Snooping, ARP Protection, Jumbo IP-MTU.
Resource usage includes resources actually in use, or reserved for future
use by the listed feature. Internal dedicated-purpose resources, such as
port bandwidth limits or VLAN QoS priority, are not included.
Figure 6-8. Displaying the Hardware Resources Used by Currently Configured QoS Policies
6-32