Assigning an 802.1p priority for a global, Ip-precedence classifier -44 – HP 5400ZL User Manual

Page 266

Advertising
background image

Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS

Assigning an 802.1p Priority for a Global
IP-Precedence Classifier

If a device or application upstream of the switch sets the precedence bits in
the ToS/Traffic Class byte of IPv4/IPv6 packets, you can use this global packet-
marking option to prioritize packets for outbound port queues. If the outbound
packets are in a tagged VLAN, this priority is carried as an 802.1p value to the
adjacent downstream devices.

Syntax: qos type-of-service ip-precedence

Causes the switch to automatically assign an 802.1p prior­
ity to all IP packets (IPv4 and IPv6) by computing a packet’s
802.1p priority from the precedence bits the packet carries.
This priority determines the packet’s queue in the outbound
port to which it is sent. If the packet leaves the switch on a
tagged port, it carries the 802.1p priority with it to the next
downstream device. (ToS IP Precedence Default: Disabled)

no qos type-of-service

Disables all ToS classifier operation, including prioritiza­
tion using the precedence bits.

show qos type-of-service

When the IP-precedence mode is enabled (or if neither Type-
of-Service option is configured), displays the ToS configu­
ration status. If the Diff-serv mode is enabled, codepoint
data is displayed as described in “Assigning a DSCP Policy
for a Global IP-Diffserv Classifier” on page 6-49.

Using the IP-precedence classifier, prioritization of outbound packets relies
on the IP-Precedence bit setting that IP packets carry with them from
upstream devices and applications. To configure and verify this option:

Default Configuration

Current Configuration

Figure 6-14. Example of Enabling ToS IP-Precedence Prioritization

To change from IP-precedence to IP-Diffserv mode, follow the procedure in
“Assigning an 802.1p Priority for a Global IP-Diffserv Classifier” on page 6-45,
which automatically disables IP-Precedence. To disable IP-Precedence with­
out enabling the IP-Diffserv option, enter the

no qos type-of-service command.

6-44

Advertising
This manual is related to the following products: