HP 400 User Manual

Page 89

Advertising
background image

5-26

Problem Resolution

Cleaning the Electrical Contacts

You may need to clean the electrical contacts on the print cartridge if:

the print cartridge cradle does not return to the home position when you press the Setup button.

the characters printed are incomplete, or if dots or lines are missing from the printouts.

To clean the contacts, use the procedure described below:

Clearing Clogged Print Cartridge Nozzles

If printouts are missing dots or lines, first try cleaning the electrical contacts by following the steps
above. If dots are still missing, then follow the steps below:

1. Remove the print cartridge from the printer and clean the

print cartridge and print cartridge cradle contacts. Use a
cotton swab lightly moistened with water.

Do not wipe the

ink nozzles on the print cartridge.

2. Once the print cartridge and print cartridge cradle contacts

are dry, reinstall the print cartridge.

.

3. Do the self-test. If the self-test is missing dots or lines, you can try clearing the print cartridge nozzles,

as described below.

1. Hold the print cartridge so that the gold rectangle, in the

middle of the raised end, points up. Place two drops of
clean water on the gold rectangle.

2. After 60 seconds, gently remove the water with a lint-free

damp cloth.

.

3. Reinstall the print cartridge and do the self-test.

• If the self-test is not missing dots or lines, the print cartridge is restored.
• If the self-test is missing dots or lines, repeat the self-test. If the dots are still missing, replace the print cartridge.

Advertising