Husqvarna 210 C - Manual (Page 21)

22 - English
3. INSTALLATION
Obstacles that slope slightly, for example, stones or
large trees with raised roots, should be demarcated
or removed. Automower can otherwise slide up onto
this kind of obstacle causing the blades to be
damaged.
If the mowing result in the garden is uneven due to
the shape of the garden, for example because of a
long passage, you have the option of dividing up your
garden into zones. This is done with the help of the
boundary wire, see the figure on the right. When the
mower is placed in zone 1, it will not mow in zone 2
and vice versa Move the mower between the zones to
maintain an even mowing results. Also see 6. Garden
example and settings page 35.
Secondary areas
It is recommended to create a secondary area when
the working area is made up of two areas that are
joined by a passage where the distance between the
boundary wires is less than 24". Run the boundary
wire then around the secondary area so that it forms
an island outside of the main area.
Automower must be moved manually between the
main and secondary areas.
Instead of forming an island with the boundary wire, it
can be beneficial to use an extra loop
generator/charger together with an extra boundary
wire. A loop generator/charger can be purchased as
an accessory. Contact your dealer for further
information.
Slopes
The boundary wire can be laid across a slope that
slants less than 10 %.
3012-765
3012-787
1 ft
Zone 1
Zone 2
3012-766
Secondary
area
Main area
3012-767US