Hearth and Home Technologies Hudson Bay Direct Vent Gas Appliance HUDBAY-FS User Manual

Page 29

Advertising
background image

10/08

Page 29

Quadra-Fire • Hudson Bay • 7003-121 Rev. i

Figure 8.8

Keeping the baffl e elevated with your free hand,

put the right side brick into position. Rest the baffl e on the
right side brick.

Figure 8.9

Still holding the baffl e in place, install the left brick

into position.

E. Brick Set Installation

Figure 8.7

To install the baffl e, slide it in at an angle and rotate

upward parallel with the fi rebox. Place baffl e up against
the heat exchangers in top of fi rebox.

Holding against heat

exchangers, slide baffl e towards front of appliance.

D. Grille Installation

Figure 8.5

Following instructions stated above, remove the

door of appliance.

Remove the four screws (two at each end) holding the grille
in place. Lift up to remove.

Install the new grille by reversing the removal instructions.

NOTE: Clean glass and gold or nickel plating with glass
cleaner and a soft cloth, wiping off all fi ngerprints prior to fi rst
fi re to prevent permanent staining.

Figure 8.6

The pilot shield has to be removed to install or

remove the brick refractory. Removal of the bracket requires
removing two screws.

Pilot Bracket

Pilot
Shield

Advertising