Hearth and Home Technologies CFX-Crescent - Manual (Page 10)

Heat & Glo • CFX-CRESCENT • 705-900 Rev. P • 12/07 10
When planning a fireplace installation, it’s necessary to determine:
• Where the unit is to be installed.
• The vent system configuration to be used.
• Gas supply piping.
• Electrical wiring.
• Framing and finishing details. Refer to Finishing Variations addendum included
in manual bag.
• Whether optional accessories, such as a remote control, arch surround or door
front are desired.
If the fireplace is to be installed on carpeting or tile, or on any combustible
material other than wood flooring, the fireplace should be installed on a metal or
wood panel that extends the full width and depth of the fireplace.
Figure 1. Diagram of the CFX-CRESCENT
12 3/4 (323mm)
19 1/8 (487mm)
3 (76mm)
Ш Ш 6 5/8 (168mm)
9 1/2 (241mm)
12 5/8 (319mm)
25 3/8 (645mm)
2 3/8 (62mm)
5 1/2
(138mm)
9 3/4 (248mm)
2 3/4
(68mm)
ELECTRICAL
ACCESS 43 1/8 (2)
(1096mm)
12 7/8 (326mm)
8 1/2 (216mm)
38 1/4
(972mm)
2 3/8
(61mm)
1 1/8
(29mm)
GAS LINE
ACCESS
34 1/2 (876mm)
6 (153mm)
9 (231mm)
38 1/2
(978mm)
46 3/4
(1187mm)
TOP VENT
COLLARS
CONTROL
VALVE
ELECTRICAL
ACCESS
AK-CFX
STARTING
COLLAR