Tasks – HP 3100C User Manual
Page 36
Obtaining status and activity information
35
Tasks
The Tasks page lists the services running on the digital sender at that
moment. Each task is assigned a Status, Error Number (Errno), and
State (St). Tasks cannot be modified or deleted and are diagnostic
tools that may be referred to by HP Technical Support staff.
To display the Tasks page
1
At the control panel, press
S
TATUS
(
A
LT
+
F3
).
2
Press
T
ASKS
(
F2
).
Log Server Addr.
IP address of the host computer that receives syslog
messages from the HP JetDirect print server.
HP JetDirect Cfg.
Indicates how the digital sender has received its TCP/IP
configuration:
●
DHCP
Automatically from a DHCP server.
●
MANUAL
Manually from entries made at the control panel.
HP JetDirect
Timeout
Timeout value in seconds that an idle data connection is
allowed to remain open. Valid values are 0 to 3600. A value of
0 disables the timeout mechanism. The default is 90 seconds.
HP JetDirect ID
HP manufacturing identification code assigned to the network
interface card.
Boot Block Ver.
Version of the digital sender startup (boot) program. This
information is used only by HP manufacturing and HP
customer support.
Multi-Boot Ver.
Version of the digital sender multi-boot program. This
information is used only by HP manufacturing and HP
customer support.
Engine FW Ver.
Version of firmware used by the digital sender scanner engine.
This information is used only by HP manufacturing and HP
customer support.
Running Image #
The firmware image currently running. Either 1 or 2.
Revision page parameters (continued)
Parameter
Descriptions