HP 3100C - Manual (Page 49)

48
Upgrading the digital sender firmware
If you register with the digital sender website ( http://
www.digitalsender.hp.com ), you will be notified by e-mail when a
firmware upgrade is available for the digital sender.
Notes about the procedure:
● When you upgrade the digital sender firmware, you replace the
existing firmware image with one or more new files.
● The digital sender is locked from use until the upgrade has
finished.
● This procedure causes the digital sender to shut down and
restart.
● The upgrade interrupts any job in progress.
● If the digital sender detects a problem with the new firmware
version, it automatically reverts to the old version.
● The upgrade takes from 1 to 5 minutes.
To upgrade the digital sender firmware
1 Download the firmware upgrade file from the digital sender
website (
http://www.digitalsender.hp.com ) to a computer
which shares the network with the digital sender.
2 Follow the instructions on the website for upgrading the firmware
image.
At the end of the procedure, you are notified of the upgrade’s success
or failure.