Replacement of parts – HP 2500C Series User Manual
Page 184
Advertising
Removal and Replacement of Parts (without Calibration)
7-34
Replacement of Parts
Installing the Carriage Motor
Step 1. Reinstall the new carriage motor by putting one screw loosely into the screw hole, reattach the drive
belt and secure the screws back in.
Step 2. Reconnect the wiring of the carriage motor.
Step 3. Slot the cover back to place. Make sure it is properly secured.
Step 4. Replace the remaining components for the Paper Knob (refer to the procedures in Installing the
Paper Knob from Replacement of Paper Knob).
Advertising