HP 2500C Series - Manual (Page 74)

Operating Overview 2-16
Using the Control Panel
I/O Menu
Item Value Explanation
IN JOB TIMEOUT=
15 5 to 300 Selects the amount of time (in seconds)
that the printer will wait within a print job
before ending it.
When the data from a print job is not
completely sent to the printer, the printer
will wait for this specified number of
seconds. After that, it will abort the job
and carry on to process the next print job.
Press [ Value ] once to change the setting
by increments of 1 or hold down [ Value ]
to scroll through the settings.
OUT JOB TIMEOUT=
15 0 to 300 Selects the amount of time (in seconds)
that the printer will wait for the next print
job before switching to another port.
This is useful especially when your printer
is connected to two different ports, such as
the parallel port and the network port.
Press [ Value ] once to change the setting
by increments of 1 or hold down [ Value ]
to scroll through the settings.
I/O CHANNEL
TIMEOUT=
120 0 to 300 Selects the amount of time (in seconds)
that the printer will receive data from a
port before switching to the next port.
When the printer is connected to different
ports with simultaneous data being sent
from these ports, the printer will be able to
toggle between ports so that jobs sent
through all ports will be given equal
priority.
Press [ Value ] once to change the setting
by increments of 1 or hold down [ Value ]
to scroll through the settings.