Hayter Mowers Condor hydrostatic Drive 510D - Manual (Page 15)

1.15 1.15 INTRODUCTION
Introduction
The Condor Hydrostatic System is a total grass cutting system designed for professional use. A range of optional
attachments are available which can be quickly interchanged.
This machine is designed solely for cutting grass and similar low lying ground vegetation within the limitations
stated in this manual. Use in any other way is considered as contrary to the intended use. Compliance with and
strict adherence to the conditions of operation, service and repair as specified in this Operator’s Manual also con-
stitute essential elements of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular char-
acteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed herein together with all other generally recognised regulations on safety and all road
traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability for any resulting
damage or injury.
The unit is petrol engine powered and has separate clutch controls for engaging the cutterhead and ground drives.
The Condor system is well balanced and incorporates a number of features for effortless safe mowing. The handle-
bar controls are ‘user friendly’ and incorporate an operator presence control system. This system will automati-
cally disengage the cutterhead and ground drive clutches when the operator releases the controls.
The Condor Hydrostatic Mower is a precision built machine designed for robust use, a high standard of finish and
long life. The way in which this mower is operated and maintained will have a profound effect on its performance
and reliability.
This manual contains advice on the safe operation of the Condor Hydrostatic Mower, which is offered for guid-
ance and protection of all those operating and servicing this machine.
In pursuit of continuous product development, Hayter Limited reserve the right to alter specifications without
notice.
Cutterhead Variants: The Condor Hydrostatic Drive Power Unit can be fitted with a range of cutterhead configura-
tions and optional extras:
30” Verge Attachment - 3 Blade
30” Verge Attachment - 5 Blade
30” Rotary Attachment
Optional Extras:
Narrow Wheel Kit.
Left and right: Throughout this manual the terms ‘left’ and ‘right’ refer to the machine when looking in the
direction of forward travel.