Hayter Mowers Condor hydrostatic Drive 510D - Manual (Page 7)

1.7 1.7
This manual should be regarded as part of the machine, as it gives essential
information regarding machine safety, operation, maintenance and specifications.
READ THIS MANUAL BEFORE USING THE CONDOR MOWER, IT IS
ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR OWN SAFETY.
THE FOLLOWING PRECAUTIONS MUST BE TAKEN TO HELP PREVENT
ACCIDENTS. A CAREFUL OPERATOR WHO USES COMMON SENSE IS THE
SAFEST OPERATOR.
SAFETY PRECAUTIONS
Training
Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. Learn how
to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may
restrict the age of the operator.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or
their property.
All drivers should seek and obtain professional and practical instruction. Such instruction should
emphasise:
The need for care and concentration when working with this machine.
Preparation
Check that the machine complies with all applicable regulations, including those in force when used on the
public highway.
While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when
barefoot or wearing open sandals. Eye protection should be worn.
Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown
by the machine.
Replace faulty silencers.
Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts and screws for
tightness. Use only genuine Hayter replacement parts.
Damaged cutterblades or loose fixing bolts are major hazards. Before use, always visually inspect the cutting
mechanism to ensure that there are in good condition. Damaged cutterblades must be replaced immediately
with genuine Hayter replacement parts. Unbalanced cutterblades may cause serious damage to your machine.
Refer to MAINTENANCE.
On attachment with twin cutterheads, take care as rotating one cutterblade will cause the other to rotate.