Hayter Mowers Condor hydrostatic Drive 510D - Manual (Page 19)

1.19 1.19
Assembling and Removing the Cutterhead Attachments - Introduction
The Condor Hydrostatic Drive Power Unit Code 510D is designed to be used with either the 30” Rotary
Cutterhead Attachment Code 212D or the 30” Verge Cutterhead Attachments Code 214D and 243D. Any of
these attachments can be quickly mounted to or removed from the power unit.
WARNING: PREVENT ACCIDENTS - Stop the engine, apply the parking brake and disconnect the
spark plug lead before attempting to remove or mount a cutterhead attachment.
WARNING: PREVENT ACCIDENTS - Do not attempt to carry out the following procedure by your-
self, another person must assist you.
Power unit with 30” Rotary Cutterhead Attachment.
ASSEMBLING THE MOWER