HP 16V - Manual (Page 62)

Menu Functions
Submenu (bold)/ltem Options
Parallel menu
Acknowledge (*12)
Bi-direction
NPAP mode
Model, Mode2, Mode3
O n , off
A u t o On, Off
Serial menu (*13)
Baud rate
Pacing
DTR polarity
ROBUST XON
1200,2400,4800,9600, 19200, 38400, 57600
DTR, Xon/Xoff
Hi, Low
on, Off
Network menu (*14)
NPAP mode
Bootp
IP address
IP netmask
IP gateway
Clear warning
<Clear warning>
Auto On
No,Yes
###. ###. ###. ### (### = 0, 1, 2, . . . .255) (*15)
###. ###. ###. ### (### = 0, 1, 2, . . . .255) (*15)
###. ###. ###. ### (### = 0, 1, 2, . . . .255) (*15)
Shows the printing component to be replaced.
Print unit
*1
*2
*3
*4
*5
* 6
*7
*8
*9
Default is Letter or A4. For example, Letter for U.S. customers
and A4 for European customers. To print on legal-size paper,
banding mode must be on or the total RAM capacity must be
12M bytes or more (optional 8MB or more).
This is for Letter and portrait. It automatically changes
depending on paper size and page orientation.
Valid when a duplex unit is installed
Makes the contours of objects appear smoother than normally
possible with the printers standard resolution.
Displayed when soft fonts are downloaded or a font SIMM card
is installed
Displayed when the selected font is a scalable and fixed-spacing
one. The default depends on a selected font.
Displayed when the selected font is a scalable and proportional-
spacing one. The default depends on a selected font.
Effective when PCL jobs are being executed. These values are
used as defaults of top and left offset specifications in PCL mode.
Displayed when the FPS (standard for 16ADV and option for
16DV) is selected for personality
User’s Manual 2-15