HP 16V - Manual (Page 82)

Enhancing and Customizing the Printer
This chapter explains the following ways to enhance or customize
your printer:
l
Add RAM up to a total of 64 megabytes except the resident RAM.
l
Add an additional interface to the parallel and serial interfaces.
l
Add a different size of paper tray.
l
Add a paper feeder as the second paper source.
l
Add a duplex unit as the two-sided printing mechanism.
For adding a multi-function feeder to the PrintPartner 16DV, see
Chapter 1.
You can order these options separately. See Appendix B for ordering
information. Contact your dealer for information on other new
options that may be available.
The following gives you brief information and installation
instructions for each option.
Notice:
Be sure that the printer is turned off before installing an option.
Do not touch any connector contacts to avoid possible electrostatic
damage to the printer.
Adding RAM
You may need to expand RAM to process more data for either of the
following reasons:
l
You commonly download several fonts when printing a job
l
You print files with complex graphics
l
You print on legal-size paper in speed mode with banding mode off
in FPS emulation (standard for 16ADV and option for 16DV)
User’s Manual 3-1