HP 16V User Manual
Page 85
Advertising
Installing an Alternate Emulation
To install the FPS emulation card, follow these steps:
1. If RAM cards are already installed, remove them.
2. Insert the emulation card into the bottom black connector.
3. Reinstall the RAM cards.
Use the bottom
black connector
With default settings, the printer automatically selects the active
emulation. To specify an emulation steadily, select the emulation
using the control panel. Use the Personality item of the Config
menu.
Once you change the emulation, the other menus change to reflect
the options and functions of the new emulation. Procedures for
working in the menus remain the same as for the PCL emulation.
3-4
User’s Manual
Advertising