Hobart Welding Products CHAMPION 10 - Manual (Page 24)

OM-945 Page 20
5-8. Installing Exhaust Pipe
801 681 / Ref. 226 427-A
!
Engine backfire can cause se-
vere burns or other injuries.
Do not point exhaust pipe to-
ward control panel. Keep
away from exhaust outlet.
.
Point exhaust pipe in desired di-
rection but always away from
front panel and direction of travel.
Tools Needed:
1/2 in
802 353-G / Ref. 226 427-A
5-9. Weld Output Terminals
1 Negative (−) Weld Output
Terminal
2 Positive (+) Weld Output
Terminal
For Direct Current Electrode Posi-
tive (DCEP), connect work cable to
Negative (−) terminal and electrode
holder cable to Positive (+)
terminal.
For Direct Current Electrode Nega-
tive (DCEN), reverse cable
connections.
Tools Needed:
3/4 in
1 2