HP FAX-700 - Manual (Page 198)

Problem Resolution 5Ć23
Table 5-2. HP FAX-700 and FAX-750 Service Parameters (Continued)
Service
Parameter
Number
Display
Indication
Parameter
Description
Settings Current
Setting
Standard
Setting
29 SILENT
DETECT IT Time interval of silence
needed for the 700/750
to detect silence. The de-
fault is 5 seconds, so
there must be a continu-
ous 5 seconds of silence
to the machine to detect
silence 0...99 X 100 ms 50 50
30 MAX RING Selects the maximum
number of rings before a
communication failure is
recognized 1...20 TIMES 20 20
31 RTC EOL Selects the end-of-line
indicator to be received
before return to control 01: EOL *6*
02: EOL *12
1 1
32 NOT USED
33 MAX XMT
SPEED Selects the highest trans-
mission speed for the
modem 01: 2400 BPS
02: 4800 BPS
03: 7200 BPS
04: 9600 BPS* 4 4
34 MAX RCV
SPEED Selects the highest re-
ception speed for the
modem 01: 2400 BPS
02: 4800 BPS
03: 7200 BPS
04: 9600 BPS* 4 4
35 XMT LEVEL Sets the amplitude of the
output signals trans-
mitted 01: 0 DBM...
16: –15 DBM
9 9
36 RCV LEVEL Sets the sensitivity of the
fax machine to received
signals 01: –33 DBM...
16: –48 DBM
11 11
37 CABLE
EQUALIZE Selects whether or not to
Equalize loss (amplitude
distortion) Between Ma-
chine and the phone
company exchange 0:off* / 1:on 0 0
38 ECHO
PROTECT Selects whether or not to
activate echo protection 0:off / 1:on* 1 1
39 XMT TO RCV
INTRVL Selects the time interval
between when the fax
machine ceases trans-
mission and is ready to
receive a call 01: 100 ms
02: 200 ms
03: 500 ms* 3 3
40 NSF Disable/enable non-stan-
dard facility (only
700/750 to 700/750) 0:off / 1:on* 1 1