HP FAX-700 - Manual (Page 246)

Problem Resolution 5Ć71
D SRAM Test – When this test is successfully completed, the following messages will appear in the
message window, and the fax machine will return to the service menu level:
Doing Self Test
SRAM Test
O K
If a self test is unsuccessful, the letters NG will replace the letters OK in the above displays.
Test Mode 04 (Remote Diagnostics) on the HP FAX-700 and FAX-750
The remote diagnostic tests were described beginning on page 5-54.
Test Mode 05 (Function Parameters) on the HP FAX-700 and FAX-750
Press the Enter button when “05: Function Parameters” is in the message window. This action moves the fax machine
to the function parameters test level. Use the up or down arrow buttons to browse through the function parameters.
Details of how to list the current settings of the function parameters and how to modify them were given earlier in this
chapter.
Test Mode 06 (Calibration Tests) on the HP FAX-700 and FAX-750
When these tests are implemented it is recommended that only central repair facilities access them.
Test Mode 07 (Agency Compliance) on the HP FAX-700 and FAX-750
It is not recommended that this mode be accessed.
Test Mode 08 (Scanner Test Mode) on the HP FAX-700 and FAX-750
When these tests are implemented it is recommended that only central repair facilities access them.
Test Mode 09 (Memory Clear) on the HP FAX-700 and FAX-750
It is not recommended that this mode be accessed.
Test Mode 10 (PC Inter Face) on the HP FAX-700 and FAX-750
This mode is not implemented.
Test Mode 11 (Service Default) on the HP FAX-700 and FAX-750
It is recommended that only central repair facilities access this mode. Auto dial numbers will be erased.
Test Mode 12 (Service Report) on the HP FAX-700 and FAX-750
This mode is used to list the current and standard settings of the service parameters and was previously described.