HONDA MM60 - Manual (Page 11)

SET-UP AND ASSEMBLY
Pre-Delivery Check List
(Dealer Responsibility)
1. Inspect the mower thoroughly after assembly to
ensure it is set up properly before delivering it to
the customer. The following check lists are a
reminder of points to inspect. Check off each
item as it is found satisfactory or after proper
adjustment is made.
2. Check all bolts to be sure they are correctly
torqued.
3. Check that all linchpins are properly installed.
4.
Lubricate all grease fittings; check to make sure
a small amount of grease comes out of seal.
5. Check that gearbox is serviced and that vent
plug is properly installed and seals are not leak-
ing.
6. Check that blades have been properly installed.
Delivery Check List
(Dealer Responsibility)
1. Check mower attitude and belt alignment.
2. Check that mower lift is properly adjusted. (See
Assembly instructions.)
3. Show customer how to make adjustments.
4.
Explain importance of lubrication to customer
and point out lubrication points on mower.
5. Point out safety features, shielding and options.
6. Present the Operator's Manual, and ask cus-
tomer to become familiar with all sections.
7. Explain to customer that when mower is trans-
ported on a road or highway, safety devices
should be used for adequate warning to
operators of other vehicles.