HONDA MM60 User Manual
Page 23
INSTALLING MOWER
Rear Mower Links Attach to Mower
4.
Put the transmission range selector in "1." For
A-4 models, engage 4-wheel drive. Press the
clutch, put the main transmission selector in
"1",
and slowly drive over the mower, controlling
your speed with the clutch.and brake.
5. Shut engine
off after driving front wheels over
mower and remove key from ignition.
Attaching Rear Mower Links to Tractor Frame
1.
Adjust the gauge wheels to their middle cutting
position (2
in).
2. Roll the deck forward or backward, right or left
to position the rear links under the quick-release
pins.
3. Attach the left rear mower link first. Pull back on
quick release pin, then
lift mower link by hand to
the
frame
brackets.
If holes
in rear link
do not
line up with frame bracket, adjust the position
of
the mower
until
they do. Keeping the holes lined
up, pull the quick release pin towards you and
turn
it to fit it into the holes. Release to lock.
Make sure that the pin reaches through the
holes inside the frame bracket. Shake the rear
mower link to check for free movement.
4.
Attach the right rear mower link in the same.
manner.
22